Medical waste treatment equipment (biomass decomposition)

Medical waste treatment equipment

Medical waste is highly infectious, biotoxic and corrosive, and if it is not properly managed or disposed of, it can be lost by wind or rain, causing pollution of water, the atmosphere, soil and direct harm to humans.

Unlike domestic garbage waste, medical waste is more hazardous due to the huge amount and variety of germs it carries, and its characteristics of spatial transmission, acute transmission, cross-contamination and latent transmission.

In order to ensure timely, efficient and harmless disposal of medical waste and prevent the spread of disease, after years of scientific and technological research, our company has designed and launched the project of biomass decomposition fuel oil after treatment of medical waste by high temperature sterilization, which can treat medical waste thoroughly and save the cost of transportation and landfill as well as turn waste into treasure and create high economic benefits.

General flow diagram of the medical waste disposal system.

1. Pre-autoclave sterilization and crushing; 2. Post-biomass decomposition for economic value

Specific operational processes for the pre-treatment of medical waste.

Crate feeding → sterilization → discharge → crushing → transfer collection → automatic crate cleaning → re-circulation

Medical waste treatment equipment effect picture

Flow chart of medical waste post-processing equipment (biomass decomposition).

The medical waste after high temperature steaming is directly transported to the low temperature atmospheric pressure biomass decomposition processor, catalytic heating, distillation of oil vapor, oil and gas through the condenser, the liquefiable part, condensed into mixed oil, the non-liquefiable part through the gas purification system processing after the gas system stabbed into the bottom of the processor burned, both save fuel energy and do not pollute the environment.

The flue gas produced after combustion enters the spray tower and mixes with the lye pumped by the pump (the pool is mixed with lye), at which time the alkaline substances in the lye react with the acidic substances in the flue gas in an acid-base neutralization reaction to achieve the purpose of removing the acidic substances in the flue gas.

After the flue gas gas is neutralized by acid and alkali, the residual alkali in the flue gas gas is removed through the packing in the adsorption tower and flows back into the pool, and the clean flue gas is discharged, completing the desulfurization and dust removal purification treatment of the flue gas; the residue after cracking is transported to the carbon black slag collection tank through the sealed winch cage, which is environmentally friendly and pollution-free.

Carbon black process flow chart
Process Item	Dedicated Equipment	Process Principle
1.Pyrolysis	Pyrolysis Plant	Under the action of high temperature and catalyst, the crude carbon black is pyrolysis under negative pressure, and some of the corresponding ash is neutralized.
2.Remove steel	Automatic steel remover	Carbon black transportation process separates the steel wire mixed in the crude carbon black.
3. Grinding powder	Milling machine	The crude carbon black obtained from pyrolysis can be processed into improved ultra-fine carbon black.
4.Carbon black improvement	Additive Mixer	Add the modified additives (powder) to the processed fine carbon black through the mixer to achieve the indicators of the finished carbon black.
5. Carbon black granulation	Wet granulator	The good fine carbon black is made into uniform size of carbon black particles.
6. Drying	Dryer	Thorough drying of the granulated carbon black.
7.Carbon black transportation	Pneumatic transportation equipment	The carbon black powder is quickly and sealedly conveyed through the pressure feed bin in each transit link, and the gas conveying is environmentally friendly and maintenance-free.
8.Packaging	Packaging Machine	According to customer requirements for the configuration of single bag packaging machine or tonnage packaging machine, packaging machine automatic weighing.
	Single bag packaging machine
	Ton packer

Products and Uses:

N550 is suitable for natural rubber and all kinds of synthetic rubber, easy to disperse, can give high stiffness, fast pressing out speed, small mouth expansion, smooth pressing out surface. It has good high temperature performance and thermal conductivity, good reinforcement performance, elasticity and recovery. It is mainly used in tire cord rubber, sidewall, inner tube and press-out and calendering products.

N660 is suitable for all kinds of rubber. Compared with semi-reinforced carbon black, it has high structure, fine particles, easy to disperse in the rubber, high tensile strength, tear strength and fixed extension stress of vulcanized rubber, while small deformation, low heat generation, good elasticity and flexural disturbance resistance. It is mainly used in tire wheel curtain rubber, inner tube, bicycle, hose, tape, cable, footwear and calendered products, model products, etc.

N774 This product is suitable for all kinds of rubber. This product has wear resistance, tear resistance, heat resistance, cold resistance, oil resistance. It is a low pollution and low stretching semi-reinforced carbon black. Its characteristic is that it can be filled in large quantities and has good processing performance. This carbon black gives high elongation, low heat generation, high elasticity and good aging resistance, increases the processing fluidity of the rubber, improves the bonding effect of the product with other materials and improves the appearance quality of the product. It is used in tire belt or cord layer, inner tube, bicycle tire, hose, tape, cable, footwear and calendered products, model products, natural rubber, neoprene, butyl rubber products, and also has the function of reinforcement and filling.

Medical waste treatment equipment (biomass decomposition)

Related product