With the development of increasingly urbanization , the amount of garbage increased geometrically. Incineration method gradually lost the market since the dioxin and toxic produced by incineration causing irreversible effects on the environment, and for landfill, some garbage is difficult to degrade, which even takes hundreds of years, we cannot afford this even though China has a vast territory, because land is a valuable non renewable resources.

　　After continuous efforts, Shangqiu Jinpeng industrial Co., Ltd developed a special biomass pyrolysis equipment for domestic waste treatment. After treatment by the equipment, can get about 20% of the oil profits from domestic waste, and in the process, through the low temperature anaerobic biomass pyrolysis of domestic waste harmless treatment, to ensure environmental health.

Flow chart for living garbage disposal equipment

Living garbage disposal equipment has two system:

　　1. Garbage Sorting System

　　The equipment is applied to separate organic waste and inorganic waste from large-size refuse and processing them separately.

　　2. Biomass Pyrolysis Equipment

　　2.1 The combustible waste after sorting and shredding such as life rubber, plastics and knitted fabrics is conveyed into the low-temperature and anaerobic biomass decomposing processor. Through catalyzing and heating, oil gas is produced and then condensed into oil mixture by condenser. The remaining that can’t be liquefied is processed through gas purification system and then used to generate electricity by gas generator. The smoke after burning goes into smoke scrubbers so as to remove acid gas and dust, and then is discharged through chimney when it reaches relevant environmental standards. The residue from biomass decomposition is conveyed into carbon black collecting tanks through sealed screw, without any pollution.

　　2.2 The technical parameter of Biomass Pyrolysis Equipment

NO.	ITEM	Technical Parameter
1	Suitable Raw Materials	Small pieces of Waste tire, rubber, waste plastic≤5cm
2	Operating Mode	Fully Continuous Operation
3	Structure	Horizontal Type Revolve
4	Loading and discharging	Fully automatic feeding and discharging under high temperature at same time
5	Capacity(24h)	20-40Mt
6	Work Pressure	Slightly Negative Pressure
7	Oil Yield of tyres	40%-45%
8	Reactor Rotational Speed	1R/M
9	Installation Power	110kw/h
10	Cooling Method	Cycle water
11	Type of Drive	Sprocket Wheel
12	Heating Method	Direct
13	Noise dB（A）	≤85
14	Main Reactor Weight （MT）	About 20Mt
15	Total Weight（MT）	About 45Mt
16	Installation Space Required	60m*20m
17	Manpower	2/shift
18	Shipment	5*40HQ
19	Delivery time	≤70Days

생활 쓰레기 처리 설비

관련 제품